A
selection of masking tapes for use in the wave solder and reflow process have
been formulated to meet the demands of the manufacturers and 'populators' of
circuit boards.
Included are several tapes that are used generally by the producers of equipment in the electronic, aerospace and defence industries.
Katco strives to maintain a 'next day' despatch service for any width
of tape from 3mm upwards.
| Code | Description |
|---|---|
| K6338 | High temperature polyimide masking tape K6338 is a high temperature masking tape for use in the wave solder and reflow process. K6338 provides a clean and safe removal after processing. It is available in slit rolls supplied to any width, 33 metres long. Dots and die-cut parts can be produced from this tape. |
| K6338A | High temperature polyimide masking tape K6338A is a high temperature masking tape for use in the wave solder and reflow process. This polyimide tape is able to perform at the higher temperatures as required in 'non lead' applications. K6338A provides a clean and safe removal after processing. K6338A is UL approved. It is available in slit rolls supplied to any width, 33 metres long. Dots and die-cut parts can be produced from this tape. |
| K6337 | High temperature polyimide masking tape K6337 is a high temperature masking and insulating tape for general use. This polyimide tape is coated with an acrylic adhesive and has high bond strength. It is available in slit rolls supplied to any width, 33 metres long. |
| K6339 | High temperature polyimide
masking tape K6339 is a high temperature resisting tape, using 50 μm polyimide film. It is also used as a mask in the wave solder process. K6339 is used where an improved tensile strength and electrical resistance is specified. K6339 is UL approved. It is available in slit rolls supplied to any width, 33 metres long. Die cut parts can be produced from this tape. |
| K6100 | High temperature polyimide double sided
release tape K6100 is a high temperature D/S release tape for use in electronic assembly and electrical insulation applications. K6100 has a film liner on both sides. It is available in slit rolls supplied to any width, 33 metres long. Die-cut parts can be produced using this tape. |
| K6290 | ESD - (anti-static) polyimide tape K6290 is designed to provide excellent electrostatic dissipation when used as a PCB wave solder mask. K6290 provides clean and safe removal after processing. It is available in slit rolls supplied to any width, 33 metres long. Dots strips and die-cut parts can be produced from this tape. |
| CM8R | Hot air levelling tape CM8R is designed for circuit masking in the hot air levelling process, where an exceptionally strong adhesion is required. It is available in slit rolls supplied to any width, 33 Metres long. Dots, strips and die-cut parts can be produced from this tape. |
| K8888 | Gold plating tape, polyester film, very
conformable K8888 is a low cost solution for the masking of gold plated edge connectors, where a highly conformable tape is required for endurance at elevated temperatures over a short period of time. |
| K3115 |
Copper foil, EMI/RFI shielding tape. Available with liner - K3115-L K3115 is used for the shielding of coils, cables, cabinets, transformers and electronic circuitry. This tape is solderable and has been used as a heating element. |
For further information and for individual specifications please contact the company direct.
We can provide you with a quotation for your masking tapes and dots, by completing this simple enquiry form: click here
Kapton® is a registered DuPont trade name