Katco :: Nomex® Paper, insulation material

Katco :: Kapton, Mylar, Cirlex, Polyimide film, Melinex, Kapton adhesive film, Nomex, masking dots, PCB making tape, Teflon, Tefzel, polymide, FEP film, Ultem

Tel: +44 (0)1442 838 150 Fax: +44 (0)1442 838170 E-mail: sales@katco.eu

Home

Kapton^® Polyimide

Teflon^® FEP & PFA film

Nomex^®

Mylar^® and Melinex^®

Cirlex^® Polyimide Sheet

Adhesive Tapes

Medical Division

Nomex^® Paper

Nomex^® paper is the preferred insulation material for Class F to Class C systems, as used by manufacturers and repairers of electrical motors, generators, alternators and dry type transformers.

The unique properties of Nomex^® also permits its use in the production of cables, electrical and electronic equipment, aerospace parts and many other diverse applications, where its exceptional properties are required i.e.

Nomex^® die cut parts

	Heat and Flame Resistance
	High Ultraviolet Resistance
	High Chemical Resistance
	Low Thermal Shrinkage

	Formable
	Low Elongation to Break
	Low Thermal Conductivity
	High Abrasion and Wear Resistance

Nomex^® is manufactured by DuPont and is available through Katco Ltd.

Nomex^® is produced in various formats and sizes, the following are available from Katco:

Nomex^® paper
Nomex^® Type 410	calandered, available in thicknesses from 0.05mm to 0.76mm. Provides the best mechanical properties and is the most widely used version.
Nomex^® Type 411	uncalandered, available in thicknesses from 0.13mm to 0.58mm. Often used as soft cushioning material or when conformability and impregnability are of importance.
Nomex^® Adhesive Tape	Nomex^® can be supplied with an adhesive backing as sheets, tape or die-cut components.
Other types	Nomex^® Type 414, Type 418, Nomex^® Pressboard, T992, T993 and T994

Nomex^® Type 410 Standard Roll, 914 mm wide
Thickness mm	Roll Weight kg	Roll Length metres
0.05	42.52	1143
0.08	45.21	768
0.13	46.26	439
0.18	50.57	320
0.25	53.84	238
0.30	51.62	183
0.38	55.73	155
0.51	59.39	119
0.61	64.18	101
0.76	63.03	82

Short Roll Service: Nomex^® is normally supplied in standard rolls, however Katco also provides short rolls from 10 linear metres long x 914mm wide.

Nomex® paper is the preferred insulation material for Class F to Class C systems, as used by manufacturers and repairers of electrical motors, generators, alternators and dry type transformers.

The unique properties of Nomex® also permits its use in the production of cables, electrical and electronic equipment, aerospace parts and many other diverse applications, where its exceptional properties are required i.e.

Nomex® is a DuPont Registered Trade Mark

Nomex^® paper is the preferred insulation material for Class F to Class C systems, as used by manufacturers and repairers of electrical motors, generators, alternators and dry type transformers.

The unique properties of Nomex^® also permits its use in the production of cables, electrical and electronic equipment, aerospace parts and many other diverse applications, where its exceptional properties are required i.e.

Nomex^® is a DuPont Registered Trade Mark